So, you want to rent a container office space in Connecticut or to buy modular house. And you probably want to protect it from the high winds that come with storms and other weather-related problems. However, professionals can assist you if you are unsure of yourself throughout the installation procedure.
According to MHB, the steps listed below have commonly been used to anchor your modular home. Therefore, before you look for containers converted to offices, let’s know the tips!
Step One
As previously said, the first step is to ensure that your foundation is level. If it is not, your walls may crumble, and the modular house may eventually collapse by slipping off the foundation.
You will most likely need to remove the skirt first to inspect the stilts that support the weight of your home. At each, use a leveling tool to determine the level. Elevate the beam to the appropriate level and move blocks under the house to support and balance it.
Step Two
After you’ve leveled your house, look up the wind zone for your location. This information should be available on a chart in your mobile home community or town. Each zone necessitates the use of many anchors. Install at least that number, but do not exceed the limit.
Step Three
To choose the anchors to purchase, you must first evaluate the soil on which your foundation has built. For the safety of your home, it is essential to engage a contractor because your assumption is not always correct.
Step Four
As previously said, the purchase of the anchors depends on your soil. Auger anchors are suitable for any soil. However, rock anchors are preferable if you have a stable base, such as rock.
Step Five
You’ll need hook-ups once you’ve got your anchors. Tie-downs that secure over the top will require a different type than tying down on the frame.
Step Six
You must dig into anchoring your modular house. You must verify that you are aware of any wires or cables placement beneath your property.
If you unintentionally touch one of these cables, you might electrocute yourself or shut off your home’s energy. It is also critical that you do not damage any pipes, resulting in a water line break.
Step Seven
After you’ve determined that it’s safe to dig beneath your house, the first step is to secure the tie-downs. This is the most popular sort of tie-down.
If you want to go all out, put the straps up against the rafter. Therefore make sure you utilize a roof cover to safeguard your strap. You should also avoid concealing any of your homes outside entrances, including the windows.
Step Eight
After you’ve secured your preferred tie-downs, you may install the anchors. This is the final stage in the installation procedure. Any anchor you purchase should come with instructions. Regardless of the variety, you will need to stabilize the product with a stabilization agent.
Step Nine
After you’ve installed everything, you’ll need to adjust the tension to get the desired degree of tightness and pressure. The sort of tie-down you buy should come with a suggested number to attain by adjusting it.
Leave a Reply